APD Esc 80F3[X] V2 8S 34V 80A

The improved F_Series 80F3[X] ESCs. Building upon our trusted ARM 32-bit architecture, the V2 release features introduce a number of highly requested features into the product range, including configuration options, Bi-Directional DShot, and UART overvoltage protection. The 80F3[X]v2 ESCs are drop-in replaceable to 80F3[X] units. As before, existing features include PWM-frequency dithering and Active Phase-Current Demagnetisation, allowing for smooth control with virtually all powertrain combinations with peak power outputs of up to 4.7 kW.

NDAA/DFARS-compliant options available upon request.

New Feature Set (V2)

• Configuration of drive parameters, signal types and fault handling
• Bi-Directional DShot for RPM Filtering support
• On board bootloader
• Passthrough firmware updating and configuration
• Additional Telemetry types: PWM Telemetry and RPM Output
• High-speed telemetry rates when operating DShot and ProShot
• Reversible operation support (full forwards to full reverse)
• Dynamic signal quality checks across supported input protocols
• Hardware protection for UART programming pins

Feature Set

• Designed and manufactured in Australia using only the highest quality components, ensuring no sacrifice in reliability
• Proprietary firmware designed in Australia
• Plug and play firmware
• Up to 8S (34 V) capable
• Up to 80 A continuous* output current
• 140 A Burst current
• True 10-bit resolution
• Virtually no setup time, with simple motor reverse solder tab
• Auto-detect ProShot or DShot
• ProShot1000 capable (1Mbs/s)
• DShot150 to DShot600 capable (0.15-0.6Mbs/s)
• Up to 750,000 eRPM (protocol dependant)
• Motor agnostic
• Auto PWM output frequency
• Auto timing advance
• Telemetry output
• Automatic current limiting and over-temperature protection
• LED indication
• Digital commands over ProShot (including anti-turtle mode)
• Digital commands over DShot
• Bare-PCB design to allow maximum integration within the end setup
• 8-Layer PCB to ensure minimal track resistance

* Continuous current ratings are at a 100% throttle duty cycle. Continuous rating is defined as max sustained current at 100% throttle for 60 seconds with 33 m/s of airflow.

Documentation and Datasheets can be found at: docs.powerdrives.net

Additional Information

Weight: 0.02kg

Dimensions: 44x22x12mm

Documentation: docs.powerdrives.net

CAD Model: 80F3 CAD Model