Mauch Premium Line 250A 8AWG Sensor Board with CFK enclosure

5 on stock
SKU
MAU2-005
€64.90 €53.20
Since July 1st 2021 the VAT rules on cross-border business-to-consumer (B2C) e-commerce activities have changed therefore total amount for EU consumers is recalculated at the checkout according to consumer country VAT rates.

250A – Current / Voltage measurement sensor board, based on Allegro Hall Sensor ACS758-200U.

This Sensor board connects directly to any Premium-Line BEC or Sensor Hub X2-V2.

Voltage range is up to 14S (60V) with solder bridge open and up to 7S (30V) with solder bridge closed. Please check the manual page for more details.

Connected to the sensor are 2x15cm AWG8 wire (red) as a standard.

REM: The connector is Molex / Clik-Mate / 1.25mm / 4p (5023800400)

Without CFK enclosure = 27.5 x 19.5 x 10.5mm / 39g (with 2x 15cm 8AWG)

With CFK enclosure = 43.5 x 23.0 x 15mm / 44g (with 2x 15cm 8AWG)

Delivery in PP box: 88 x 60 x 20mm / 59g 

Delivery without sensor cable (comes with the BEC's), with CFK enclosure

REM: If you want to use your own BEC, then please order a sensor cable (040) and ensure that the supplied voltage is within 4.95-5.05V.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account