DJI Matrice 240W Power Adapter
DJI 240W Power Adapter is a powerful original DJI charging solution designed for professional DJI Enterprise equipment. With a maximum total output power of 240 W, it provides fast and efficient charging for compatible battery charging hubs while also offering a dedicated USB-C output for remote controllers, smartphones and other USB-C devices.
The power adapter features two outputs: one DJI SDC output and one USB-C port. The SDC connection is designed for compatible DJI charging hubs, while the USB-C port provides up to 65 W of charging power when used independently. This makes the adapter particularly practical for professional drone operations, where batteries and additional equipment often need to be charged at the same time.
When both outputs are used simultaneously, the total available power is intelligently distributed and the USB-C output supports up to 45 W. This allows operators to charge a compatible DJI battery charging hub while simultaneously supplying power to a remote controller or another USB-C device.
DJI 240W Power Adapter is compatible with the DJI Matrice 4D Series and can also be used with the DJI Matrice 4 Series when connected through the DJI Matrice 4 Series Charging Hub (200W). This makes it a useful charging solution for professional Matrice 4 and Matrice 4D workflows.
With the DJI Matrice 4D Series, the adapter provides impressive fast-charging performance. Under specified test conditions, one Matrice 4D Series battery can be charged from 15% to 90% in approximately 30 minutes when used with the appropriate charging equipment. Fast turnaround is particularly valuable for inspection, mapping, public safety, emergency response and other professional operations where aircraft availability is critical.
The adapter supports a universal AC input voltage of 100–240 V at 50–60 Hz, making it suitable for professional users working internationally. Maximum AC input current is 3 A. The supported operating temperature range is 5°C to 35°C.
The DJI 240W Power Adapter carries the product model designation CDX230-240. As an original DJI accessory, it is designed to integrate correctly with supported DJI charging equipment and provides the power required for demanding enterprise battery charging workflows.
The package includes the DJI 240W Power Adapter, a Type-C cable and an AC power cable. The exact AC plug type can vary depending on the country or region in which the adapter is purchased.
For operators using DJI Matrice 4 Series or Matrice 4D Series equipment, the DJI 240W Power Adapter provides a compact and powerful charging solution for the office, vehicle support setup or field deployment. Its combination of 240 W total output, dedicated SDC connectivity and additional USB-C charging makes it an essential accessory for maintaining an efficient professional drone workflow.
In The Box
240W Power Adapter × 1
Type-C Cable × 1
Specifications
• Product Model: CDX230-240
• Input Voltage: 100-240 V (AC), 50-60 Hz, max 3 A
• Output Power: Max 240 W (total), Max 65 W (USB-C)*
• Operating Temperature: 5° to 35° C (41° to 95° F)
Charging Time*:
DJI Matrice 4D Series Battery: charging one battery from 15% to 90% takes only 30 minutes
* When both charging ports are used simultaneously, the USB-C port's maximum output power is 45 W. Charging time may be slightly extended.
Compatibility
DJI Matrice 4D Series
DJI Matrice 4 Series
DJI 240W Power Adapter je zmogljiv originalni DJI napajalnik za hitro in učinkovito polnjenje profesionalne DJI Enterprise opreme. Omogoča največjo skupno izhodno moč 240 W ter ima dva izhoda: DJI SDC in USB-C.
SDC priključek je namenjen povezovanju z združljivimi DJI polnilnimi postajami, USB-C priključek pa omogoča do 65 W izhodne moči za polnjenje daljinskih upravljalnikov, telefonov in drugih USB-C naprav. Če uporabljate oba izhoda hkrati, USB-C omogoča največ 45 W.
Napajalnik je združljiv s serijo DJI Matrice 4D. Z DJI Matrice 4 Series ga je mogoče uporabljati preko DJI Matrice 4 Series Charging Hub (200W). Pri Matrice 4D Series lahko v ustrezni kombinaciji polnilne opreme eno baterijo napolni od 15 % do 90 % v približno 30 minutah.
DJI 240W Power Adapter podpira vhodno napetost 100–240 V AC, 50–60 Hz, zato je primeren tudi za profesionalne uporabnike, ki opremo uporabljajo v različnih državah. Delovno temperaturno območje je od 5 °C do 35 °C.
Zaradi visoke moči, SDC priključka in dodatnega USB-C izhoda je odlična rešitev za profesionalne uporabnike DJI Matrice 4 in Matrice 4D, ki potrebujejo hitro polnjenje in čim krajše prekinitve med operacijami.