Are you unhappy with DJI systems because off battery info? Do u want to have all information on HoTT remote about consumption, voltage, altitude, temperatures on escapes, ....
We have solution for you!
Scope of delivery:
- 1x air module
- 2x lipo connection cable expander
- 1x temperature sensor
- 2x bullet 6mm connector
General sensor for Graupner HoTT receiver and models with electric motor.
Important Note when using the modules 33600, 33601, 33610, 33611 and 33620:
Do not carry out any programming work on the sensors while the model is flying, otherwise there is a real risk that your model will fly out of control while you are not concentrating on it!
If your model is fitted with two or more receivers, it is absolutely essential that you do not carry out programming work during a flight, as this can alter the settings in the receivers to which no telemetry equipment is connected; in the worst case this could result in the model crashing! For this reason always carry out programming on the ground, and check that only the receiver with connected sensors is powered on.
|Dimensions (LxWxH)||51 x 47 x 18||mm|
|Operating voltage||3,6 ... 8,4||V|
Connections and Technical data Vario: